THM – AXIAL PISTON PUMP -T014511981
The THM AXIAL PISTON PUMP T014511981 is designed for high-pressure hydraulic systems. It requires careful installation and operation, including clean oil and proper alignment.
Download product brochureSpecifications
| Brand | THM |
|---|---|
| Category | Aerial Working Platform |
Overview
Upgrade your hydraulic system with AXIAL PISTON PUMP – T014511981, designed for maximum efficiency, durability, and high-pressure performance.
Key highlights
- Cleanliness level must meet ISO 4406 18/15
- Coaxiality shall not exceed 0.05
- Inject hydraulic oil into housing oil drain ports 1 and 12
- Air in casing must be exhausted before operation
- Avoid collision with drive shaft during running
Product details
1. Installation precautions
Technical requirements
(1) Before installation, the cleanliness level of the mailbox and connecting pipes must meet ISO 4406 18/15.
(2) Before installation, make sure that there are no burrs on the joint surfaces and that the installation surfaces are free of debris and dust.
(3) During the installation process, a lifting device should be used.
(4) When lifting, avoid touching the oil port sealing surface.
(5) Be especially careful not to allow debris to enter the oil port.
(6) Do not damage the drive shaft. Please loosen the lifting device after tightening the mounting screws.
(7) When connected to the main engine, the coaxiality between the main shaft and the engine main shaft (or connecting sleeve) shall not exceed 0.05.
2. Precautions for use
(1) Before operation, inject hydraulic oil into the pump body from the housing oil drain ports 1 and 12.
(2) Before operation, the air in the casing must be exhausted.
(3) When in use, there should be no hydraulic oil or other liquid residue on the joint surfaces of the pump.
(4) When the pump is running, avoid collision with the drive shaft.
Related products
Tap the photo to zoom