THM – FRONT PUMP – T014511983

Product details

Technical requirements
1. Installation precautions:
(1) Before installation, the cleanliness level of the fuel tank
and connecting pipes must meet IS04406 18/15.
(2) Before installation, make sure that there are no burrs on
the joint surfaces and that the installation surface is
free of debris and dust.
(3) During the installation process, a lifting device should
be used.
(4) When lifting, avoid damaging the oil port sealing surface.
(5) Be especially careful not to allow debris to enter the
oil port.
(6) Do not damage the drive shaft. Please loosen the lifting
device after tightening the mounting screws.
(7) When connected to the main engine, the co-axiality between
the main shaft and the engine main shaft (or coupling sleeve)
shall not exceed 0.05.

2. Precautions for use:
(1) Before operation, inject hydraulic oil into the pump body
from the housing oil drain ports T1 and T2.
(2) Before operation, the air in the casing must be exhausted.
(3) When in use, there should be no hydraulic oil or other
liquid residue on the joint surfaces of the pump.
(4) When transporting the pump, avoid collision with the
drive shaft.